• Two-way SK Valve with Replaceable Seat

    • Hand, motor, air operators are standard
    • Sizes 8" to 14"
    • Left or right hand mounting
    • 45° diverter leg
    • Ductile iron housing with cast iron branch
    • 50 psi seal tested
    • Standard flange drilling
    • 400°F Max. temperature
    • Abrasion resistant design
    • Explosion proof operators
    • NFPA 85f version available

  • Type "FA"

    • 3, 4, 5, 6, 8, 10 & 12 (75, 100, 125, 150,200, 250 & 300 mm) sizes available
    • 15 PSIG (1.1 Kg/cm2) & 150°F (65°C) std. design
    • Lip type shaft seals
    • Non lubricating type bearings
    • Double acting air cylinder
    • NEMA 4, 7, 9 electrical rating
    • Dual solenoid with manual override, 120 V.
    • 2 SPDT limit switches
    • Prepiped and prewired to a switch box
    • Combinations of aluminum/stainless steel materials of construction
    • Flanged connections

  • 45 Degree

    • 3, 4, 5, 6, 8, 10 & 12 (75, 100, 125, 150,200, 250 & 300 mm) sizes available
    • 15 PSIG (1.1 Kg/cm2) & 150°F (65°C) std. design
    • Lip type shaft seals
    • Non lubricating type bearings
    • Double acting air cylinder
    • NEMA 4, 7, 9 electrical rating
    • Dual solenoid with manual override, 120 V.
    • 2 SPDT limit switches
    • Prepiped and prewired to a switch box
    • Combinations of aluminum/stainless steel materials of construction
    • Flanged connections

  • 90 Degree

    • 3, 4, 5, 6, 8, 10 & 12 (75, 100, 125, 150,200, 250 & 300 mm) sizes available
    • 15 PSIG (1.1 Kg/cm2) & 150°F (65°C) std. design
    • Lip type shaft seals
    • Non lubricating type bearings
    • Double acting air cylinder
    • NEMA 4, 7, 9 electrical rating
    • Dual solenoid with manual override, 120 V.
    • 2 SPDT limit switches
    • Prepiped and prewired to a switch box
    • All aluminum construction
    • Flanged connections

  • Two-Way Gravity Diverter Gate

    General
    The diverter gate offers high operating efficiency and long life. Body, end plates, and gate are rugged castings, fully ribbed to ensure dimensional stability. The body and diverter gate are machined to close tolerances to prevent leakage and ensure smooth operation. Bearings are of the non-lubricating type. Lip-type shaft seals provide gas-tight performance.

    Materials of construction
    This product is available in either Class 50 cast iron, 319 aluminum. Bearings are Oilite® bronze, and lip seals are nitrile. Other seal materials are available.

    Temperature limitation Standard gates are suitable for material temperature up to 225°F (107°C). Special seals available as HO & AMO. Special seals accommodate higher operating temperatures.

  • Two-Way SK Diverter Valve

    General
    The FLSmidth Type SK Two-way Valve is available in eight standard sizes; 3 through 6- inch (75 through 150 mm) valves match I.D. of standard pipe; 8 through 14-inch (200 through 350) match I.D. of standard Schedule 30 pipe. Available hand or left hand mounting.

    Design for 400°F Max. temperature

    Body -Durable cast iron construction.

    Disc -The internal mechanism works on the sliding disc and port principle. Hardened seats and discs resist abrasion and are lapped to maintain a positive seal at the closed port.

    Motor -Motor operation features a built-in mechanical brake for accurate positioning of the valve seal disc. Motor electrical requirements are 3 phase, 60 Hz., 230/460 V.

    Air - Heavy-duty air cylinder actuator with dual solenoid, 120V NEMA 4, pre-piped

    Accessories -Limit switches for position indication are standard on motor-operated valves; optional on manually operated valves.

    Special Application -High temperature 850°F (455°C), NFPA-85F design, alternate materials, voltages.