• Fuller-Kinyon Screw Pump

    Fuller®-Kinyon™ Screw Pump

    • High performance
    • Low maintenance
    • Maximum efficiency
    Fuller®-Kinyon™ Type M Pumps are constructed of cast iron and steel, and mounted on a cast iron base. Type M pumps are equipped with ball bearings that support a pump screw at both ends to help provide a smooth, balanced operation. The screw is dynamically balanced and areas of this screw, along with other parts of the pump in direct contact with the material to be conveyed, are made of hardened, wearresistant material and special hard surfacing where required. The screw is directly coupled to the driving motor but can be v-belt driven. Standard equipment on Type M pumps includes a pressurized seal and bearing assembly that extends the service life of the discharge seals by preventing the material being handled from entering the bearing area. Each pump system includes the pump, drive motor and compressed air source.

  • Power Plant Dust Collector Airslide Gathering System

    A2P™: Airslide® to Pump Fly Ash Handling System

    • Nearly maintenance-free
    • Capital cost reduced by up to 50%
    • Continuous ash removal from collection hoppers
    • Only two moving pieces between collection hopper and storage
    • Continuous conveying to storage

  • Fuller-Kinyon Kompact II Pump

    Fuller®-Kinyon Kompact pumps require only a low-pressure, low-velocity air supply to efficiently meet its large throughput capacity.
    Material to be discharged from a hopper bottom rail car enters the pump hopper through a boot lift rail car connection by gravity and is advanced through the barrel by a dynamically balanced impeller screw which is driven through a V-belt drive arrangement with an overhead mounted drive motor.

    As the material advances through the barrel, it is compacted by the decreasing pitch of the screw flights. It is further compacted by by the space between the terminal flight of the screw and the discharge check valve disc to create the material seal. (This seal serves as the air lock to prevent the conveying air from blowing back through the barrel.)

    The material then enters the mixing chamber, where it is fluidized by compressed air introduced through air nozzles. From there, the material and air mixture enter the transport pipe.

    Specifications
    The Fuller®-Kinyon Kompact II Pump is steel fabricated, consisting of a hopper leading into a barrel section. Material enters the pump from a bin or hopper-bottom car outlet. The material is advanced into the barrel section by an impeller screw, and is compacted by the decreasing pitch of the screw flights. The material is then fluidized by air introduced from a low-pressure positive displacement blower, and travels throughout the conveying line to the discharge point.

  • Fuller-kinyon Kompact 61V Pump

    Fuller®-Kinyon Kompact pumps require only a low-pressure, low-velocity air supply to efficiently meet its large throughput capacity.
    Material to be discharged from a hopper bottom rail car enters the pump hopper through a boot lift rail car connection by gravity and is advanced through the barrel by a dynamically balanced impeller screw which is driven through a V-belt drive arrangement with an overhead mounted drive motor.

    As the material advances through the barrel, it is compacted by the decreasing pitch of the screw flights. It is further compacted by by the space between the terminal flight of the screw and the discharge check valve disc to create the material seal. (This seal serves as the air lock to prevent the conveying air from blowing back through the barrel.)

    The material then enters the mixing chamber, where it is fluidized by compressed air introduced through air nozzles. From there, the material and air mixture enter the transport pipe.

    Fuller®-Kinyon™ Kompact™ 61V Pump

    • Proven reliability since 1961
    • Heavy-duty cast iron
    • Minimum maintenance
    • Totally enclosed, dust-free
    • Installed directly under hopper bottom railcar
    • Cast iron design
    • V-belt drive flexibility
    • More than 45 years experience
    • Capacities up to 11603 ft hour
    • Suited best for railcar unloading
    • Low pressure operation
    • Dust-free

  • H Pump

    See Color Coded Parts Drawing
    Red: Basic Kit
    Yellow: Option To Basic Kit
    Yellow + Blue +Red = Complete Kit

  • M Pump

    Fuller-Kinyon® Type M Pump with 3-piece Screw Parts Identification

  • Fuller-Kinyon® Pump Auto-Lube Systems

    The Hands-Off Approach to Fuller-Kinyon® (FK) Pump Lubrication

    The FK pump Auto-Lube lubrication system is designed to deliver the precise amount of lubrication required for each FK pump while monitoring the bearing temperatures. The bearings, seals and blowout lever shaft are lubricated on an adjusted hourly interval.

    Due to the 2-liter capacity of grease, the FK Auto-Lube system can deliver up to 4 months of continuous lubrication between refills while continually monitoring bearing temperatures to prevent and reduce failures from improper lubrication.