A2P Continuous Conveying System,A2P, Fly Ash Handling System on FLSmidth Inc. (F.L. Smidth, Inc.)
FLSmidth Inc. (F.L. Smidth, Inc.) - Item # A2P, Fly Ash Handling System
Industries
Services and Capabilities
Investor Relations
News & Press
Careers
About FLSmidth
Contact
Products & Services
Pneumatic Conveying
Pneumatic Blending
Upgrades, Accessories, and Maintenance
Air Compressors
Gas Compressors
Air Gravity Conveyors and Airslide ™ Systems
Feeders, Airlocks and Rotary Valves
Diverter Valves
Fuller-Kinyon™ Pumps (Material Handling Pump, FK Pump, Screw Pump)
Railcar / Truck Unloading
Ship & Barge Unloading Systems
Storage Reclaim Equipment
Contact Us / RFQ
FLSmidth Pneumatic Transport Corporate Site
Search Catalog
By Keyword
By Item #
All Categories
Fly Ash Handling System
All Categories
>
Fuller-KinyonTM Pumps (Material Handling Pump, FK Pump, Screw Pump)
>
Fly Ash Handling System
>
Item # A2P
Download PDF
Printable Page
Email This Page
Save To Favorites
Item # A2P, Fly Ash Handling System
Download PDF
Email This Page
Save To Favorites
larger image
Airslide™ Gathering System
Fly ash continuously discharges from all dust collector hoppers simultaneously. Ash becomes fluidized within the Airslide conveyor and flows rapidly down the slope via gravity. Fluidization air is heated to further ensure proper ash flow to the Fuller-Kinyon pump. The pump acts as a "line charger," injecting the ash into the pressurized convey pipeline while acting as an airlock between the conditions in the dust collector / Airslide conveyor and the conveying system.
The FK Pump conveying system uses carbon steel straight piping and hard iron sweep fittings. A simple bin vent filter is required at the destination silo to vent the conveying air.
Components of The Airslide™ / FK™ Pump System
·
Additional Power Industry Information
Components of The Airslide™ / FK™ Pump System
Airslide Air Gravity Conveyor
Conveys fluidized product via gravity through sloping trough. The conveying plenum (top) and air plenum (bottom) are separated by a proprietary 5-ply porous membrane.
Air supply is low pressure fan or blower package.
No moving parts within material flow stream
As an example of Airslide capabilities, Airslide conveyor gathering networks are installed in power plants on circulating dry scrubbers (both baghouses and electrostatic precipitators) with circulating ash/lime flows over 400 STPH.
Ten to twenty year fabric life is common under standard conditions.
Fuller-Kinyon™ Pump Line Charger
Continuously injects bulk materials into a pressurized convey pipeline
Variable pitch screw continuously compresses bulk product as it enters the windbox (material/air mixing chamber). Compressed product forms a “material seal” against the convey line pressure.
Extremely simple operation and maintenance
Direct dive, electric motor
Over 30 pumps installed for fly ash conveyance within coal-fired power plants in the last six years. Literally thousands of pumps installed worldwide since pump was introduced in 1920’s.
Additional Power Industry Information
Fly Ash Management
Fly ash intercept systems
Process conveying with Fuller-Kinyon pumps
Dome storage and reclaim
Silo aeration and loadout
Fly ash blending
Modu-Flo MT Dense Phase Ash Handling Systems
Simple, but heavy-duty components for long life and reliability
Simplified controls result in reduced system and installation costs
Only one valve in contact with the conveyed material
Low velocity conveying for greater efficiency and cost effectiveness
Minimal headroom required
Reagent Handling Systems for the Power Industry
Transport and unloading
In-plant transfer
Flue duct injection
Boiler injection
Duct injection
Conventional Fly Ash Handling Systems
Silo storage, fluidizing, loadout
Vacuum systems
Pressure systems
Vacuum / Pressure systems
DOWNLOADS
Brochure
(PDF, 775KB)
A2P: Airslide to Pump Fly Ash Handling System
(JPG, 76KB)
Upgrades, Accessories and Maintenance
Z-FLAP Conversion Kit
Conversion Kit Two-Piece Screw and Seal Assembly
more available ..