Search Catalog
      GO   
 All Categories    Airslide Aeration Unit Packages
All Categories > Pneumatic Conveying > Standard Pneumatic Conveying Equipment > Bins / Silos > Airslide Aeration Unit Packages > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Airslide Aeration Unit Packages

Check up to five results to perform an action.


Airslide™ Aeration Unit Packages

General
Each Airslide Aeration Unit Package consists of standard FLSmidth 8-inch (200 mm) open type Airslide conveyor units in lengths of 5 and 10 feet (1.5 and 3 m) depending on the slope length of the conical storage area. Each package consists of three or six Airslide conveyor units for layout as three or six spoke patterns. Three spoke patterns are normally used with materials which have good fluidizable characteristics. Six spoke patterns provide maximum aeration for difficult materials which can be fluidized.
Airslide conveyor units have been successfully used in handling fine, dry materials such as cement, gypsum, soda ash, fly ash and dusts, barites, bentonite, hydrated lime, ground limestone, ground ores, alumina, alumina hydrate, catalysts, silica, phosphates, talc, detergent and soap powder, calcined magnesite and other materials. Material should be generally no less than 40 percent passing 200 mesh.

Construction
Each unit is a standard 8-inch (200 mm) Airslide conveyor unit [10-inch (250 mm) installation width] constructed of fabricated steel plate covered with a specially woven polyester fabric which can handle materials up to 350°F (175°C).

Air Supply
A source of clean, dry air is required. Minimum SCFM for each package is listed. Pressures should be 3 - 5 PSIG (.21 - .35 Kg/cm2) minimum at the aeration unit. Blower units, such as Sutorbilt/Roots blower units offered by FLSmidth, are a reliable, economical source of air for the aeration packages.




Compare Items
   
  Results 1 - 6 of 6 1 

Part #

Description

Hopper Slope Length

Airslide Aeration Unit

Min. Air Requirement

305 A. Description: Airslide Aeration Unit Packages - 3 spoke arrangement 6 - 10 ft. three - 5 foot units 100 scfm
310 A. Description: Airslide Aeration Unit Packages - 3 spoke arrangement 11 - 15 ft. three - 10 foot units 200 scfm
315 A. Description: Airslide Aeration Unit Packages - 3 spoke arrangement 16 - 21 ft. three - 5 foot units
three - 10 foot units
300 scfm
605 B. Description: Airslide Aeration Unit Packages - 6 spoke arrangement 6 - 10 ft. six - 5 foot units 200 scfm
610 B. Description: Airslide Aeration Unit Packages - 6 spoke arrangement 11 - 15 ft. six - 10 foot units 400 scfm
615 B. Description: Airslide Aeration Unit Packages - 6 spoke arrangement 16 - 21 ft. six - 5 foot units
six - 10 foot units
600 scfm
  Results 1 - 6 of 6 1