FLSmidth Inc. (F.L. Smidth, Inc.) - Two-Way Gravity Diverter Gate

Products & Services

 
Search Catalog
      GO   
 All Categories    Two-Way Gravity Diverter Gate
All Categories > Pneumatic Conveying > Standard Pneumatic Conveying Equipment > Diverters / Convergers > Two-Way Gravity Diverter Gate > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Two-Way Gravity Diverter Gate

 width= 
Check up to five results to perform an action.
 width=


General
The diverter gate offers high operating efficiency and long life. Body, end plates, and gate are rugged castings, fully ribbed to ensure dimensional stability. The body and diverter gate are machined to close tolerances to prevent leakage and ensure smooth operation. Bearings are of the non-lubricating type. Lip-type shaft seals provide gas-tight performance.

Materials of construction
This product is available in either Class 50 cast iron, 319 aluminum. Bearings are Oilite® bronze, and lip seals are nitrile. Other seal materials are available.

Temperature limitation Standard gates are suitable for material temperature up to 225°F (107°C). Special seals available as HO & AMO. Special seals accommodate higher operating temperatures.
Two-Way Gravity Diverter Gate

larger image 		Dimensional Drawing

larger image


Request InformationCompare Items   Results Per Page : 
  Results 1 - 4 of 4 1 

Item #

Size

Dimension A

Dimension B

Dimension C

Dimension D

Dimension E

TWGDG-5 x 5 5 x 5 in. 5 in. 5 in. 5 in. 5 in. 9 1/8 in.
TWGDG-5 x 10 5 x 10 in. 5 in. 10 in. 5 in. 10 in. 9 1/8 in.
TWGDG-8 x 12 8 x 12 in. 8 in. 12 in. 8 in. 12 in. 13 in.
TWGDG-10 x 16 10 x 16 in. 16 in. 16 in. 10 in. 16 in. 21 in.
  Results 1 - 4 of 4 1 
To the top