Search Catalog
      GO   
 All Categories    Discharge Valve Shrouded Suction Airlock
All Categories > Pneumatic Conveying > Standard Pneumatic Conveying Equipment > Discharge Valves > Discharge Valve Shrouded Suction Airlock > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Discharge Valve Shrouded Suction Airlock

Check up to five results to perform an action.


General The FLSmidth Shrouded Suction Airlock uses a rotor with closed vane pockets which keeps material from contacting the end plates. This valve is primarily designed to release material at relatively fixed rates for dust collector applications. Handles materials up to 400°F (205°C). Maximum temperature surrounding motor 104°F (40°C). Higher temperature options at additional cost. Available with or without motor drive. Pressure differential up to 30" W.G.

Body All #50 cast iron construction machined for close tolerances.

Rotor Fabricated steel with closed ends. Four pockets. optional, Standard or Beveled rotor vanes. This valve is equipped with shielded anti-friction bearings. End plates are fabricated steel bolted and taper pinned to the cast body.

Motor Mounting Motor support lugs cast as an integral part of the feeder body permits the mounting of the gear motor directly on the unit resulting in a compact package.

Motor The FLSmidth shrouded rotary airlock with drive unit is equipped with a right angle gear motor, 3 phase, 230/460 Volt, 60 Hz. Standard airlock speed is 15 rpm. Gear motor speed 35 rpm. Sprockets and chain included. Specify quantity, description, feeder or feeder with drive, size and part number.




Compare Items
   
  Results 1 - 8 of 8 1 

Part #

Size

Dimension A

Dimension B

Dimension C

Dimension D

Dimension E

Type

Displacement

305-65-4-0638-00 8 in. 12 in. 6 1/4 in. 8 7/8 in. 8 7/8 in. 1 in. Feeder (Only) 0.16 ft³
305-64-4-0786-00 10 in. 15 in. 7 1/2 in. 11 3/4 in. 11 3/4 in. 1 3/4 in. Feeder (Only) 0.41 ft³
305-65-4-0584-00 10 x 18 in. 15 in. 7 1/2 in. 15 3/4 in. 15 3/4 in. 1 3/4 in. Feeder (Only) 0.68 ft³
305-73-4-0013-00 15 in. 23 in. 11 1/2 in. 17 1/4 in. 17 1/4 in. 1 3/4 in. Feeder (Only) 1.55 ft³
132-69-4-5006-04 8 in. 9 1/2 in. 15 7/16 in. 9 1/2 in. 8 7/8 in. N/A Feeder with drive 0.16 ft³
132-69-4-5007-04 10 in. 11 7/8 in. 17 13/16 in. 12 5/8 in. 11 3/4 in. N/A Feeder with drive 0.41 ft³
132-69-4-5010-04 10 x 18 in. 12 9/16 in. 19 in. 16 1/4 in. 15 3/4 in. N/A Feeder with drive 0.68 ft³
305-73-4-0017-00 15 in. 15 5/8 in. 22 3/8 in. 18 3/8 in. 17 1/4 in. N/A Feeder with drive 1.55 ft³
  Results 1 - 8 of 8 1