FLSmidth Inc. (F.L. Smidth, Inc.) - Feeder P Rotary (Airlock)

Products & Services

 
Search Catalog
      GO   
 All Categories    Feeder P Rotary (Airlock)
All Categories > Feeders, Airlocks & Rotary Valves > Feeder P Rotary (Airlock) > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Feeder P Rotary (Airlock)

 
Check up to five results to perform an action.

Closed End Rotor

larger image 		General
FLSmidth manufactures three (3) types of “P” feeders with closed end rotors:
Type I Body end plates constructed of #50 cast iron with fabricated stainless steel rotor.
Type II Body and rotor constructed of type 304 stainless steel with aluminum end plates.
Type III Complete 304 stainless steel (body, rotor and end plates).

Body and End Plates
The body and end plates have heavy-duty construction and permit minimum rotor clearances. Motor support lugs are cast as an integral part of the body, and permit the mounting of the gearmotor directly on the unit, resulting in a compact package.

The end plates have integral-cast outboard bearing supports and male-female joints between end plates and feeder body ensuring concentricity.

Rotor
All rotors are beveled and constructed of type 304 stainless steel or fabricated steel. Rotors have six or seven vanes with at least four vanes in seal between inlet and outlet.

Bearings are shielded, anti-friction and mounted on rotor shaft outboard of the packing gland.

Motor Mount & Drive
Gearmotors are mounted directly to feeder body. Fractional gearmotors are TENV. Integral horsepower gearmotors are TEFC. All gearmotors are 3 phase, 230/460 Volts AC, 60 Hz.

Special Notes
All standard “P” Rotary feeders (airlocks) are designed to handle material having maximum temperature of 150°F (65°C). Above 150°F to 450° (65°C to 232°C) requires additional periphery clearance.

Note : Basic assemblies (with/out Drive) are also available.


Request InformationCompare Items   Results Per Page : 
  Results 1 - 12 of 12 1 

Item #

Type

Size

Displacement

Power

Purge Air

Feeder with Drive Weight

305-64-4-0071-00 Cast Iron Fabricated Steel Rotor 8 in. 0.12 ft³/rev 3/4 - 1 hp 7.2 scfm 270 lbs
132-70-4-1901-03 Cast Iron Fabricated Steel Rotor 10 in. 0.39 ft³/rev 1 hp 7.7 scfm 420 lbs
132-70-4-2000-03 Cast Iron Fabricated Steel Rotor 10 x 18 in. 0.64 ft³/rev 1 hp 13.2 scfm 470 lbs
132-68-4-2102-00 Cast Iron Fabricated Steel Rotor 15 in. 1.33 ft³/rev 1 1/2 - 2 hp 13.2 scfm 1022 lbs
132-68-4-1851-02 Stainless Steel Aluminum End Plates 8 in. 0.12 ft³/rev 3/4 - 1 hp 7.2 scfm 270 lbs
132-70-4-1901-02 Stainless Steel Aluminum End Plates 10 in. 0.39 ft³/rev 1 hp 7.7 scfm 420 lbs
132-70-4-2000-02 Stainless Steel Aluminum End Plates 10 x 18 in. 0.64 ft³/rev 1 hp 13.2 scfm 470 lbs
132-71-4-2100-02 Stainless Steel Aluminum End Plates 15 in. 1.33 ft³/rev 1 1/2 - 2 hp 13.2 scfm 1022 lbs
132-68-4-1851-01 Complete 304 Stainless Steel 8 in. 0.12 ft³/rev 3/4 - 1 hp 7.2 scfm 270 lbs
132-70-4-1901-01 Complete 304 Stainless Steel 10 in. 0.39 ft³/rev 1 hp 7.7 scfm 420 lbs
132-70-4-2000-01 Complete 304 Stainless Steel 10 x 18 in. 0.64 ft³/rev 1 hp 13.2 scfm 470 lbs
132-71-4-2100-00 Complete 304 Stainless Steel 15 in. 1.33 ft³/rev 1 1/2 - 2 hp 13.2 scfm 1022 lbs
  Results 1 - 12 of 12 1 
To the top