FLSmidth Inc. (F.L. Smidth, Inc.) - Feeder TE Rotary (Airlock)
Sitemap
Search Catalog :
By Part Number
By Keyword
Home
Pneumatic Conveying
Pneumatic Blending
Upgrades, Accessories, and Maintenance
Air Compressors
Gas Compressors
Air Gravity Conveyors and Airslide™ Systems
Feeders, Airlocks & Rotary Valves
Diverter Valves
Fuller-Kinyon™ Pumps (Material Handling Pump, FK Pump, Screw Pump)
Railcar/Truck Unloading
Ship & Barge Unloading Systems
Storage Reclaim Equipment
Contact Us/RFQ
FLSmidth Pneumatic Transport Corporate Site
Search Catalog
By Keyword
By Item #
All Categories
Feeder TE Rotary (Airlock)
All Categories
>
Feeders, Airlocks & Rotary Valves
>
Feeder TE Rotary (Airlock)
>
View Items
Download PDF
Printable Page
Email This Page
Save To Favorites
Feeder TE Rotary (Airlock)
Check up to five results to perform an action.
larger image
General
When installed in a pressure conveying system, the use of (optional) Lantern Rings and (standard) Air Purge is recommended when fine powdery material is being conveyed to prevent contamination of packing and bearing. The air purge should be set 2 to 4 PSIG (.14 to .28 Kg/cm2) above conveying line pressure.
Body and End Plates
The body and end plates are heavily ribbed and constructed of #50 cast iron. Motor support lugs are cast as an integral part of body and permit the mounting of the gearmotor directly on the unit, resulting in a compact package.
The end plates have integral cast outboard bearing supports and male-female joints between end plates and feeder body ensuring concentricity.
Rotor
All rotors are constructed of machine #50 cast iron and have six or eight vanes with four vanes in seal between inlet and outlet except for the 2" totally enclosed feeder (airlock) which has four vanes.
The rotor shaft has a tapered hub to reduce friction from trapped material between rotor and end plates. Anti-friction bearings are shielded, and mounted on rotor shaft outboard of the packing gland.
Beveling of the rotor vane is recommended if the material has a tendency to build up and smear.
Motor Mounts
All gearmotors are mounted directly to feeder body except the 2" and 5" (50 mm and 125 mm) TE Feeders which incorporate a single common steel base plate.
Motor Drive
All fractional gearmotors are TENV. All integral horsepower gearmotors are TEFC. All gearmotors are 3 phase, 230/460 Volts, 60 Hz.
Special Notes
All standard feeders (airlocks) are designed to handle material having a maximum temperature of 150° F (65° C). Above 150° F (65° C requires additional periphery and end clearances. From 700° F to 900° F (371° C to 482° C) requires additional clearance and water cooled shaft. Above 900° F (482° C) and not in excess 1200° F (650° C) requires ductile iron construction, special bearings and water cooled rotor.
Note:
Basic assemblies are also available
Results per Page :
25
50
100
200
Results 1 - 25 of 28
1
2
Item #
Flange Type
Size
Displacement
Power
Rotor Type
Approx. Weight With Drive
132-68-4-0302-00
Rectangular
7 3/4 x 10 in.
0.15 ft³/rev
3/4 - 1 hp
Standard
370 lbs
132-68-4-0303-00
Rectangular
8 x 10 in.
0.30 ft³/rev
1 hp
Standard
470 lbs
132-68-4-0404-00
Rectangular
10 x 11 1/2 in.
1.0 ft³/rev
1 - 2 hp
Standard
640 lbs
132-68-4-0401-00
Rectangular
12 x 13 in.
1.8 ft³/rev
1 1/2 - 2 hp
Standard
995 lbs
132-68-4-0402-00
Rectangular
12 x 20 in.
2.75 ft³/rev
1 1/2 - 2 hp
Standard
1145 lbs
132-79-4-0502-00
Rectangular
16 x 16 in.
3.27 ft³/rev
2 - 3 hp
Standard
1615 lbs
132-79-4-5303-00
Rectangular
16 x 27 in.
5.19 ft³/rev
2 - 3 hp
Standard
2115 lbs
132-68-4-0302-02
Rectangular
7 3/4 x 10 in.
0.15 ft³/rev
3/4 - 1 hp
Beveled
370 lbs
132-68-4-0303-02
Rectangular
8 x 10 in.
0.30 ft³/rev
1 hp
Beveled
470 lbs
132-68-4-0404-02
Rectangular
10 x 11 1/2 in.
1.0 ft³/rev
1 - 2 hp
Beveled
640 lbs
132-68-4-0413-02
Rectangular
12 x 13 in.
1.8 ft³/rev
1 1/2 - 2 hp
Beveled
995 lbs
132-68-4-0402-02
Rectangular
12 x 20 in.
2.75 ft³/rev
1 1/2 - 2 hp
Beveled
1145 lbs
132-79-4-0502-02
Rectangular
16 x 16 in.
3.27 ft³/rev
2 - 3 hp
Beveled
1615 lbs
132-79-4-0503-02
Rectangular
16 x 27 in.
5.19 ft³/rev
2 - 3 hp
Beveled
2115 lbs
132-68-4-0003-00
Circular
2 in.
0.014 ft³/rev
1/2 hp
Standard
160 lbs
132-68-4-0004-00
Circular
5 in.
0.18 ft³/rev
3/4 hp
Standard
240 lbs
132-68-4-0002-00
Circular
6 in.
0.26 ft³/rev
3/4 - 1 hp
Standard
370 lbs
132-68-4-0102-00
Circular
8 in.
0.57 ft³/rev
1 - 1 1/2 hp
Standard
485 lbs
132-68-4-0101-00
Circular
10 in.
1.26 ft³/rev
1 - 2 hp
Standard
730 lbs
132-68-4-0201-00
Circular
12 in.
2.30 ft³/rev
1 1/2 - 2 hp
Standard
980 lbs
132-68-4-0204-00
Circular
16 in.
3.50 ft³/rev
2 - 3 hp
Standard
1360 lbs
132-68-4-0003-03
Circular
2 in.
0.014 ft³/rev
1/2 hp
Beveled
100 lbs
132-69-4-0008-00
Circular
5 in.
0.18 ft³/rev
3/4 hp
Beveled
240 lbs
132-69-4-0009-00
Circular
6 in.
0.26 ft³/rev
3/4 - 1 hp
Beveled
370 lbs
132-69-4-0110-00
Circular
8 in.
0.57 ft³/rev
1 - 1 1/2 hp
Beveled
485 lbs
Results 1 - 25 of 28
1
2
