• Cast body and end plate for 8", 10" & 16" x 27"
  • All metric feeders - Ductile iron body and cast iron end plates
  • 0.100” (2.54 mm) thick ceramic bore
  • Tungsten carbide throat protection
  • Heavy-duty fabricated 8-vane rotor
  • Tungsten carbide rotor vane and shroud tips, 0.100” (2.54mm) thick
  • Air purge seal connections
  • Air gap between seals and bearings
  • Outboard sealed ball bearings
  • Maximum operating temperature: 200°F (100°C)
Abrasion Resistant feeders are available with :
  • Rotors, 0.100" (2.54mm) tungsten carbide overlay on tips of vanes and shroud
  • Body, 0.100" high alumina ceramic tile bore with strip of 0.100" tungsten carbide at the leading edge of the throat at the bore
Available as basic assemblies and motor drives
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Compressor Size

Size

Displacement

Max. Operating Temperature

Ball Bearings

Hard Surfaced Tip Rotor

ARCF-8 N/A 8 in. N/A 0.15 ft³/rev N/A 200 ºF100 ºC N/A Outboard sealed N/A Colmony #6
ARCF-10 N/A 10 in. N/A 0.39 ft³/rev N/A 200 ºF100 ºC N/A Outboard sealed N/A Colmony #6
ARCF-150 N/A 150 mm N/A 0.55 ft³/rev N/A 200 ºF100 ºC N/A Outboard sealed N/A Colmony #6
ARCF-300 N/A 300 mm N/A 1.09 ft³/rev N/A 200 ºF100 ºC N/A Outboard sealed N/A Colmony #6
ARCF-700 N/A 700 mm N/A 2.60 ft³/rev N/A 200 ºF100 ºC N/A Outboard sealed N/A Colmony #6
ARCF-2500 N/A 2500 mm N/A 9.08 ft³/rev N/A 200 ºF100 ºC N/A Outboard sealed N/A Colmony #6
ARCF-16 x 27 N/A 16 x 27 in. N/A 4.70 ft³/rev N/A 200 ºF100 ºC N/A Outboard sealed N/A Colmony #6
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1