General The basic, durable construction of the FLSmidth Material Level Indicator permits sustained continuous operation over long periods of time.
Each material level indicator consists of a head assembly coupled to a paddle shaft arrangement. This simple combination permits quick assembly and easy servicing.

Head Assembly and Motor The head assembly contains a drive motor and electrical circuitry within a cast aluminum housing. When energized, the drive motor rotates a drive shaft and paddle until material restricts the paddle rotation. The motor then rotates around the stopped drive shaft, activates electrical contacts and remains in a stalled position. When the material falls away from the paddle, the paddle begins to rotate and the motor and electrical contacts return to their initial positions.
All head assemblies are equipped with two normally open and two normally closed electrical contacts. The SG-6-FS and SG-6X-FS units ate equipped with fail-safe circuitry to provide notification of power loss, open or shorted motor circuit, or failure of a protected component.
Components within the head assembly can be easily inspected without removing the entire unit.

Paddle Shaft Arrangements A number of paddle shaft arrangements are available in cold rolled carbon and stain- less steel. Vertical lengths in excess of six (6) feet (1829 mm) use a flexible shaft coupling. Standard vertical extensions may be shortened by the customer.
Horizontal units are available with and without protective guard supports to shield the paddle shaft. A stainless steel paddle (7" x 3") is standard on all applications.

Temperature Application In all application, air temperature surrounding the motor assembly head should not exceed 200° F (93° C).

Pressure Application Models SG-6-D, SG-6-FS, SG-6X-D and SG-6X-FS are designed for maximum operating pressure of 30 PSIG (2.2 Kg/cm2).

Electrical
Motor
: 110V or 220V, 50 or 60 Hz.
Switch Rating: 20 Amp 125, 250 or 480 VAC (Models SG-6-D & SG-6X-D).
Relay Contacts: 20 Amp 120, 240 or 277 VAC (Models SG-6-FS & SG-6X-FS)
1 - 25 of 40 | Results Per Page | View | Unit of Measure
1 2 

Compressor Size

Item Name

Material

Voltage

Description

Length

Model

Application

116-85-1-1200-00 N/A Head Assembly N/A Cast Aluminum N/A 110 V N/A N/A N/A SG-6-D N/A
116-85-1-1200-01 N/A Head Assembly N/A Cast Aluminum N/A 220 V N/A N/A N/A SG-6-D N/A
116-85-1-1200-08 N/A Head Assembly N/A Cast Aluminum N/A 110 V N/A N/A N/A SG-6-FS N/A
116-85-1-1200-09 N/A Head Assembly N/A Cast Aluminum N/A 220 V N/A N/A N/A SG-6-FS N/A
116-85-1-1200-04 N/A Head Assembly N/A Cast Aluminum N/A 110 V N/A N/A N/A SG-6X-D N/A
116-85-1-1200-05 N/A Head Assembly N/A Cast Aluminum N/A 220 V N/A N/A N/A SG-6X-D N/A
116-85-1-1200-10 N/A Head Assembly N/A Cast Aluminum N/A 110 V N/A N/A N/A SG-6X-FS N/A
116-85-1-1200-11 N/A Head Assembly N/A Cast Aluminum N/A 220 V N/A N/A N/A SG-6X-FS N/A
116-72-4-1201-06 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 2 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-08 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 3 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-00 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 4 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-02 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 5 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-04 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 6 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-07 N/A Paddle Shaft Application Item N/A Stainless Steel N/A N/A N/A 2 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-09 N/A Paddle Shaft Application Item N/A Stainless Steel N/A N/A N/A 3 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-01 N/A Paddle Shaft Application Item N/A Stainless Steel N/A N/A N/A 4 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-03 N/A Paddle Shaft Application Item N/A Stainless Steel N/A N/A N/A 5 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-05 N/A Paddle Shaft Application Item N/A Stainless Steel N/A N/A N/A 6 ft N/A N/A Application A - Vertical, Right Shaft Guard
116-72-4-1201-50 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 7 ft N/A N/A Application C - Vertical, Extended Shaft
116-72-4-1201-40 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 8 ft N/A N/A Application C - Vertical, Extended Shaft
116-72-4-1201-42 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 9 ft N/A N/A Application C - Vertical, Extended Shaft
116-72-4-1201-44 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 10 ft N/A N/A Application C - Vertical, Extended Shaft
116-72-4-1201-46 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 11 ft N/A N/A Application C - Vertical, Extended Shaft
116-72-4-1201-48 N/A Paddle Shaft Application Item N/A Carbon Steel N/A N/A N/A 12 ft N/A N/A Application C - Vertical, Extended Shaft
116-72-4-1201-51 N/A Paddle Shaft Application Item N/A Stainless Steel N/A N/A N/A 7 ft N/A N/A Application C - Vertical, Extended Shaft
1 - 25 of 40 | Results Per Page | View | Unit of Measure
1 2