General
The standard FLSmidth slide gate employs a grip handle for manual operation of the gate. Good for applications up to 400° F (205° C).

Body
The body of the 7-inch (175 mm) and 10 x 16 inch (250 x 400 mm) units is a twopiece cast iron assembly. The 10-inch (250 mm) unit is fabricated steel. A gasket at the gate aperture maintains a seal. The upper body over-laps the perimeter of the gate which is supported by lugs on the lower wall. This gives the unit a "self-cleaning" feature with no ledges or pockets to trap dust.

Gate
The gate is constructed of sturdy plate steel.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Item #

Body Material

Size

Height (A)

Top Flange Outside Dimension (D)

Top Flange Outside Dimension (E)

Bottom Flange Outside Dimension (H)

Bottom Flange Outside Dimension (J)

304-64-4-0050-00 N/A Two Piece Cast Iron N/A 7 in. N/A 5 7/8 in. N/A 10 1/2 in. N/A 10 1/2 in. N/A 9 1/2 in. N/A 9 1/2 in.
304-64-4-0067-00 N/A Fabricated Steel N/A 10 in. N/A 4 1/4 in. N/A 16 in. N/A 16 in. N/A 16 in. N/A 16 in.
304-64-4-0149-02 N/A Two Piece Cast Iron N/A 10 x 16 in. N/A 4 3/4 in. N/A 16 in. N/A 22 in. N/A 13 1/2 in. N/A 23 in.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1