FLSmidth Inc. (F.L. Smidth, Inc.) - Discharge Valve Slide Gate (Manual)

Products & Services

 
Search Catalog
      GO   
 All Categories    Discharge Valve Slide Gate (Manual)
All Categories > Pneumatic Conveying > Standard Pneumatic Conveying Equipment > Discharge Valves > Slide Gate > Discharge Valve Slide Gate (Manual) > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Discharge Valve Slide Gate (Manual)

 width= 
Check up to five results to perform an action.
 width=


General
The standard FLSmidth slide gate employs a grip handle for manual operation of the gate. Good for applications up to 400° F (205° C).

Body
The body of the 7-inch (175 mm) and 10 x 16 inch (250 x 400 mm) units is a twopiece cast iron assembly. The 10-inch (250 mm) unit is fabricated steel. A gasket at the gate aperture maintains a seal. The upper body over-laps the perimeter of the gate which is supported by lugs on the lower wall. This gives the unit a "self-cleaning" feature with no ledges or pockets to trap dust.

Gate
The gate is constructed of sturdy plate steel.
Discharge Valve Slide Gate (Manual)

larger image 		Dimensional Drawing

larger image


Request InformationCompare Items   Results Per Page : 
  Results 1 - 3 of 3 1 

Item #

Body Material

Size

Height (A)

Top Flange Outside Dimension (D)

Top Flange Outside Dimension (E)

Bottom Flange Outside Dimension (H)

Bottom Flange Outside Dimension (J)

304-64-4-0050-00 Two Piece Cast Iron 7 in. 5 7/8 in. 10 1/2 in. 10 1/2 in. 9 1/2 in. 9 1/2 in.
304-64-4-0067-00 Fabricated Steel 10 in. 4 1/4 in. 16 in. 16 in. 16 in. 16 in.
304-64-4-0149-02 Two Piece Cast Iron 10 x 16 in. 4 3/4 in. 16 in. 22 in. 13 1/2 in. 23 in.
  Results 1 - 3 of 3 1 
To the top